I have been trying to push the black buttons out of the stock so I can shorten the length of pull. They appear to be glued in place. Is there a trick to removing them?
Thanks,
Ray
2 Likes
It doesn’t change the pull length. It shortens or lengthens the stock.
Theyre under spring tension from the recoil spring. They just push out but you need to apply some pressure on the butt stock
2 Likes
These are the buttons that I need to remove in order to shorten the stock. And, they appear to be glued…
3 Likes
Looks like a sub2k butt stock but mine dont have 2 big cap lookin buttons like that. And i havent seen any others that had buttons like that.
3 Likes
Mine doesn’t either
2 Likes
FYI adjusting the stock length is adjusting the length of pull.
7 Likes
@SD-Ray …
It seems you own a nanny state Subby. Those knobs were installed 'cause your daddy don’t want you adjusting LOP. Also, CA requires 30" minimum OAL length - measure b4 you shorten the LOP.
So, order yourself a replacement stock - if KT will send it, it won’t have those black things in your way.
I’m betting you have a fancy fin on your grip too.
10 Likes