Rear site removal wont work without ruining folding connection

All Things SUB-2000!
I wanted to remove my rear sight for my optic…i did notnwnt to co witnes…well removing it made the joint were it folds wobbly. It would not lock down tite, even with the post screwed vack in without the sight. So i cant remove it unless i put some sort of spacer in there to hold the pressure. any thoughts to what i can do?

1 Like

Gen 1 or Gen 2? If I recall correctly, there’s a slight difference.

Remove it, cut the peep off, put the rest back.

3 Likes

Someone makes a spacer to fill the area where sight was removed. Or you can trim the wings which allows manually folding down the sight. Multiple posts on both if you search.

4 Likes

Thx so much simple simple

2 Likes

Performance Services has your solution.

4 Likes

Ok both options are great…i especially like the threaded cap for replacing front site,but i am seeing now that MCarbo has the flip down replacement ! Of course MCarbo wins again :slight_smile: very nice

5 Likes

Red Lion sells a nice but expensive flip front sight.

2 Likes