P365 Mod Thread

I’m sure a lot of you know that I bought a P365 SAS quite a while back.
And soon after that I bought an XL grip module, making it a P365X SAS.
This was just before the “X” existed, so I referred to it as a P365 XL SAS.
This is, in my opinion, the best balance between both carry and shooting.
However, I have that original grip module that I’d like to do something with.
I have been thinking of getting a new FCU and putting a long XL slide on it.
Making a completely new configuration that Sig hasn’t thought to release yet.
Maybe we can call this version the P365 XL Carry or something like that.

4 Likes

Cal it the VSP365 XL

In homage to yourself and a knock at the WCP365 :grin:

3 Likes

I purchased the P365 FCU from SIG and basically researched modifications and built my own version of the P365 XL. I LOVE this gun and the way it feels when I shoot it. The only thing I am missing is the M*CARBO SIG P365 Short Stroke Flat Trigger which I just ordered.
Parts List:
Zev Octane P365 XL Slide
Zev Pro Barrel
Icarus A.C.E. Elite P365 Grip Module
Vuurwapen P365 Extended Mag Release
MagGuts +2 Magazine spring kit.
XS BigDot F8 Night Sight (Co-witness with 507K)
Holosun 507K-GR
TLR-7 Sub 1913

3 Likes

Interesting mod for the P365…
Go Guns Gas Pedal

3 Likes

Very cool custom pistol. Welcome.

3 Likes

@SeaBee Very nice build. I’m still on the fence on which slide I want to use.
If the comp slide was available, I’d probably go that route with a 3.1" barrel.
I do really like that grip module, but I’m going to use the one I have on hand.

Thanks for posting and welcome to the site.

2 Likes

On my first 365, I put in a McCarbo spring kit, replaced the sights with Trijicon HDs, and added a green laser. I bought a second 365, put in a McCarbo spring kit, added a green laser, and WAS thinking about getting the slide milled for an optic, but, ended up trading top ends to the XL, and put an optic on it. I really don’t care much for the longer upper, and my shorter one is actually more accurate. Both will shoot under 3" groups at 25 yards, with ammunition they like best.

1 Like


I like the 365!

Top Left- My sons 380 with Wilson Combat XL Grip + Tungsten Weights and Armory Craft Magazine Floor Plates

Top Right- My 9mm with Armory Craft XL Grip, Floor Plates and True Barrel.

Lower Left- My 9mm X-RAY with Icarus Precision XL Aluminum Grip, Griffin Barrel and Comp, MCARBO Spring Kit and Holosun Circle Dot.

Lower Right- My wife’s 9mm X-RAY with Sig Laser Etched XL Grip.

.

6 Likes

What’s that Wilson Combat grip module like? I like the way it looks, but my concern is the texture won’t offer as much grip as the factory module

2 Likes

I like it the best, it has a palm swell built in which fits the hand really nicely. The grip texture is better than factory unless you go with Sig’s new aggressive grip module.
Most of the grip on a pistol is achieved from the front and back of the grip and the WIlson has aggressive texture for that purpose

3 Likes

Very nice collection. How is the 380? I’ve been curious about them.

2 Likes

I took it to the range yesterday for the first time.
Zero failures using cheap Blazer aluminum ammo and a box of S&B.
As an honest opinion, I really enjoyed shooting it, it’s a different experience from its 9mm cousin. Shoots really flat and obviously low recoil.
I wouldn’t hesitate to carry this piece, Sig did a nice job with this one.

5 Likes

Thanks for the input. Now I really want it lol

4 Likes

Sorry about that, I’m really good at spending other people’s money.:grinning:

3 Likes

3 Likes

2 Likes

+1 on the MagGuts

These kits seem awesome so far. I ordered a couple last week.
I haven’t tested them on the range but feel confident they are gtg.
They are much easier to load, but I’ll still use my Uplula loader.
Carrying 14+1 is huge benefit with no extra grip length or printing.

2 Likes

ValorSolo, I already have the MagGuts installed and have used them on the range. Put about 200 rounds through my gun with them. They functioned Flawlessly so far. I also put the Tactical Development Pro Ledge base plate on the magazines.

Tactical Development MAGGUTS COMPATIBLE PRO LEDGE FOR XL 12+2 ROUND MAG

https://tactical.dev/collections/all-p365-sas-x-xl-products/products/mag-guts-compatible-pro-ledge-for-xl-12-round-mag

1 Like

Just installed the M*CARBO Short Stroke Flat trigger in both my P365’s. I could not be happier with this upgrade.

5 Likes