M*CARBO Brotherhood

KSG dissasembly question

Anyone out there able and/or willing to help me with a KSG Issue? For my first cleaning after first time shooting it, I loosened the magazine bolts 1/4 turn by 1/4 turn each. One bolt spins freely. The other spins free half-ish turn then gets tight, then loose again, then tight. I cant remove the mag tubes from the receiver. Worse, I cant seem to get it back properly as my bolt no longer locks. This is after re-tightening the mag tubes 1/4 turn by 1/4 again. What is going on, and what can I do about it? Any help or constructive advice would be greatly appreciated. Thanks in advance.

3 Likes

Magcaps are captured. When they spin freely they are off. In order to get to mag tubes you need to be able to get barrel nut and bracket off.

3 Likes