Glock Builders Thread

Magazines?
Also youll need a shaved down nut driver for the front sight screw. I cant remember the size off hand, but will check my toolbox in the am.

2 Likes

@ValorSolo Charles these are a cheap hack… I put these on all my Glocks. I HATE the drain hole at the bottom of the grip. This keeps things cleaner.

BASTION Glock 19 Aluminum Grip Frame Insert Plugbvb https://smile.amazon.com/dp/B07R7BHDPW/ref=cm_sw_r_apan_glt_fabc_NQ47M8G4BA1E47V8DKED?_encoding=UTF8&psc=1

4 Likes

I didn’t include them in the list but I ordered 2 PMAG 15rd mags.
And I have the front sight tool, 3/16. Taurus has Glock sights now.

Thanks for checking. Let know if you see anything else.

3 Likes

This is what your missing.

4 Likes

Or just use the pointy the end of the gun and pull the trigger?

4 Likes

I added the mags to the list above with a link.
$15 shipped for mags is a welcome change.

I’m trying to get a complete, working Glock built.
Add-ons will come later. Right now I’m at $450.
That’s a good deal for a pretty good Glock clone.

This is what I want to achieve and then upgrade.
That plug seems like a good idea, might get one.
@cico7 Will those work for the PMAG’s?

4 Likes

And they have a ton of laser printed designs or quotes. I just went with black.
You can get much cheaper plastic plugs from Fixxer, but I prefer the aluminum.

3 Likes

You might like one of these.
I have one ordered for my P80 build.
I really like it on my Shadow Systems MR.

2 Likes

i can inquire. I have a running commentary with one of the guys fro Milspin…

3 Likes

…a particularly good idea, say when rescuing alive humans trapped in a burning vehicle… :rofl:

Actually like those quite a bit, too bad they only make them for the Glocks.

5 Likes

I dig on them every email they send me.
It’s a good company and I have purchased several items from them.

4 Likes

Yeah, but I am kinda a “shoot the hostage and get home for dinner on time” kind of guy.

4 Likes

This may have been a better deal by about $5.
It’s a complete frame with FCG already installed.
But I was unsure of which trigger I wanted to use.

PSA Dagger Compact Complete Polymer Frame, Black | Palmetto State Armory

2 Likes

More bodies = more paperwork

4 Likes

Less interviews, easier investigation

3 Likes

Milspin:
“Our Slide back plates and Magazine base plates are manufactured to work on factory Glock items. Let me know if I can be of assistance in the future.”

4 Likes


Well here she is. Built, tested and 25 rounds through her.
I’m impressed by the simplistic design. So easy to build.
I had an instruction video playing but mostly ignored it.
Other than the pins, they required some serious pounding.
I’ve read the reviews where others also had this issue.

I didn’t install the sights. Wanted to function test it first.
The mag fell out 3 times during shooting. Not sure why.
Maybe I’m hitting the release. I don’t think that I am.
The mag locks in securely and can’t be wiggled out.

I was expecting a real dog fart of a trigger, it’s not bad.
Actually, it’s not bad at all. I need a real Glock to compare.
I thought I would hate the trigger safety, but it’s okay.
The felt recoil is more than expected, but I don’t mind.

The 15 round mags should be here today or tomorrow.
I ordered a RMR cover plate off eBay this morning.

All in all, I think I will like it. More shooting required.
Now I’ll go ahead and put these sights on it.

9 Likes

Looks really good!:+1:t3:
I had the pin issue on my P80 build but after a few times of installing and removing them they are much better.
Here it is:

6 Likes

@AV8R Nigel is that a Lasermax guide rod laser? I see silver where there is normally black.

3 Likes

Not that fancy!
Lone Wolf stainless guide rod and spring. Worth every penny.

4 Likes