No Gun Smiths or Shops that do the Powder Coating or Anodizing Here in JUNO Town !
Brad, I believe that ‘we’ have very many similarities and traits??? Wow! If you are putting two firearms together and you already have your 223/566 set-up, I would go for a 7" Maurador pistol. I don’t know how much control you have with your arms, but you can handle a 300 Black Out/458 SOCOM. I am sure you want to be ‘different?’ My diabetic ‘challenges’ will not handle those calibers so I have to become a little more creative? I want to CORRECT a statement you had made earlier. I cannot meet your expectations of calling me a VETERAN. I am ‘just’ a BROTHER OF ARMS per se… In 1993 I had taken the placement test for the ARMY. The recruiter called me the next morning, almost begging me to set up an appointment for a physical. Unfortunately, it was found out that I had ‘full-blown’ diabetes. I was immediately refused to go any further with my application. Both the recruiter and I felt disenchanted by the results of my tests. However, both my wife (Veteran Airforce) and my father (Veteran Army) shared their pride of me. My father was a tough man to convince… If it were ‘possible,’ I have be more proud of my family than with myself (no 'judgement on myself
So (Juno) is the ‘hub center’ to both your firearms’ and (WALLMART) to your shopping needs??
That’s funny I’ve been eyeballing that Maurader for quite sometime now! 300 I have the mags for but the 458 is cool and not to many around here have! As far as service at least you went and applied which is more then what I did! But I think back on things I did and didnt do as a kid and wonder if I would be where i am and have the ever expanding family that i have now and grateful for!
One ‘other’ investigation that I would perform, @69Goat, https://www.armorcore.com/ Well brother, I believe that ‘great minds’ think alike??? If you have those hex wrench drivers, you can give them to your wife, if she is ‘also’ the tool ‘hoarder?’ That would be a ‘no brainer’ with my wife… I am ALWAYS trying to cut ways in which to save. I guess that I would get my money back and take her out to a ‘lunch special…’ If your purchase was at a Lowe’s or Home Depote, I would suspect that there is a Chinese Restaurant, Chick Filet, Mc D, or sumething that you can ‘stop’ and acknowledge your honey.
My guess is that everything goes to Ankerage, AK? When I was a GMPP Claim Representative back in the early 1990’s I had remembered dealing with car dealerships there and there were no other towns, at that time.
NEGATIVE !! No Wallmart here’ they went Under/Tits up’ 1 Fred Meyers No sporting goods/ Guns and Fun Stuff’ And 1 Sportsmens Whare House’ But they just got here a little over a 2 years ago. They just figured out how to get 22 Magnum and keep it around for all the PMR"S they are selling’
But I have been Buying from Ammo Supply Whare House in Panrump, Nevada for Years since the big Hoard and Ammo Scare’ I pay the Hazards Material Fee and they deliver to my door Via the big Hold Up Anchorage’ UPS, Or I put in ground on the Slow Canoe for $80 Per Hundred pounds.
@lonewolf Team Toyota/Honda Hut’ In Juneau Took over GMC mid 90’s When no one Else in Town Wanted the Head Aches and the Rest of the Story’ Is History I didnt and would work on them’ After the Quality Control of the Honda and Toyota Products and Their Great tech lines and Support.
Alaska has always ‘enticed’ me to move out there. I also see costs being extremely ‘expensive.’ The shipping of motor vehicles and many of the ‘toys’ seems like you are paying EXTREME ‘luxury taxes?’ I do not know how affordable ‘she is,’ especially to the elder and the disabled. I watch a lot of ‘network television’ and find that the Alaskan Eskimos (Inuits) in the more remote areas suffer very much the same fate as ‘our people’ from many of the reservations in the lower 48. Many circumstances from ALL areas are becoming SAD.
By the way, I had figured out that you had ALWAYS been a GM’man ever since reading all your earlier posts! My guess is that you had quit being a service tech when the service center ‘sold out’ to the Toyota dealership? Many thanks for enlightening me about Alaska…
@lonewolf dont worry about it my native son its a selfish world out there you do your build nobody in the brotherhood will judge you or think your selfish
I would totally be down with a new stock option
Wow! Very nice! I like that alot!
That’s gorgeous. Ive wanted to do mine just like this. I love fde and black. I have an AR47 like that to.
I love that digital camo on those! Very nice! How hard was the hydrodip?
Hydrographics are easy with a little practice. Ive been doing it for last couple years as my side job. I have posted alot of my own guns and some customers on here that i have dipped. I started it to do my stuff but it really has started keeping me busy in my spare time. And if anyone here is wanting to try it therselves. Id be happy to try and walk you threw it. Just pm me for any questions.
My mcarbo cheek pad came in and the recoil reducing charging handle. I put the red recoil rubber piece in to. Then added strike ind mlok rail covers for better grip. Just bought a happy stick.
What did you use for paint? I have the Midnight Bronze, and am looking for an accent color to paint the stock and rails.
The stock is from Keltec. The rest is rail covers. No paint required.
I’ve added a few more touches of tan to it. I’ll have to add new pics.